HOW DO I MEASURE MY WINDOWS FOR BLINDS INSTALLATION?

How do I measure my windows for blinds installation?

How do I measure my windows for blinds installation?

Blog Article

 

How to Measure Your Windows for Blinds Installation


Properly measuring your windows is crucial for a successful blinds installation. Accurate measurements ensure that your blinds fit perfectly and function as intended. Window Blinds in Murfreesboro  Here’s a comprehensive guide on how to measure your windows for blinds installation:

Tools You’ll Need



  • Measuring Tape: A retractable measuring tape is ideal.

  • Pencil and Paper: For recording measurements.

  • Step Ladder: To reach high windows safely.

  • Level (optional): To check for evenness.


Step-by-Step Measurement Guide


1. Decide on the Mounting Type

Before taking measurements, decide if you want to mount the blinds inside the window frame (inside mount) or outside the frame (outside mount).

  • Inside Mount: Blinds are mounted within the window frame, giving a sleek, built-in look. Requires precise measurements to ensure the blinds fit snugly.

  • Outside Mount: Blinds are mounted outside the window frame, covering a larger area. This option can make windows appear larger and offers better light control.


2. Measure for Inside Mount


  1. Measure the Width

  2. Use the Measuring Tape: Place the tape measure at the top of the inside edge of the window frame, and measure across the window frame at three points: the top, middle, and bottom.

  3. Record the Narrowest Measurement: Take note of the smallest width measurement. This ensures that your blinds will fit within the frame without obstruction.

  4. Measure the Height

  5. Measure from Top to Bottom: With the measuring tape, measure from the top inside edge of the window frame to the bottom inside edge at three points: the left side, middle, and right side.

  6. Record the Longest Measurement: Choose the longest height measurement to ensure the blinds cover the entire window.

  7. Measure the Depth

  8. Measure the Depth of the Window Frame: This is the space from the front edge of the frame to the glass. Depth is essential to ensure the blinds will fit properly inside the frame.

  9. Ensure Sufficient Clearance: Check that the window’s depth can accommodate the blinds, including any necessary brackets or mounting hardware.


3. Measure for Outside Mount


  1. Measure the Width

  2. Measure the Desired Coverage Area: Use the measuring tape to determine how wide you want the blinds to extend beyond the window frame. For a clean look, add at least 1-2 inches on each side of the window frame.

  3. Record the Measurement: Measure from one side of the intended coverage area to the other.

  4. Measure the Height

  5. Measure from Top to Bottom: Determine where you want the top of the blinds to start (usually a few inches above the window frame). Measure from this point to the desired end point below the window frame.

  6. Record the Measurement: Measure from the top point to below the window frame, adding extra length if you want the blinds to extend below the window sill.

  7. Measure the Projection

  8. Measure the Distance from the Wall: Determine how far the blinds will project out from the wall. Murfreesboro Blinds Installation  This is crucial if you have obstructions like window handles or if you want to ensure the blinds hang properly.

  9. Check for Obstacles: Make sure there are no obstructions that could interfere with the blinds’ operation.


Tips for Accurate Measurements



  • Double-Check Measurements: Always measure twice to avoid errors. Small inaccuracies can lead to blinds that don’t fit correctly.

  • Use a Helper: Having someone assist can make measuring easier, especially for large or high windows.

  • Consider the Mounting Brackets: Ensure there is enough space for the mounting brackets, especially for inside mounts.


Final Steps



  1. Review Your Measurements: Cross-check all recorded measurements to ensure they are correct.

  2. Consult Manufacturer Guidelines: Different blinds may have specific measurement requirements or recommendations. Always refer to the manufacturer’s guidelines.

  3. Order Blinds: Once you’re confident in your measurements, you can place an order with your chosen blinds provider.


By following these steps, you’ll ensure a smooth and successful blinds installation process. Accurate measurements lead to a perfect fit, enhancing both the functionality and aesthetic of your window treatments.

Report this page